Clamp meter with True RMS functionality is the DCL11R.
Users can measure the current range designated in IEC61010-1 CAT. III 300V using the DCL11R clamp meter. It is appropriate for gauging the current in electrical devices and low-voltage power lines. With a maximum overload protection of 350 Amperes, the clamp sensor in this instrument is rated for a maximum input current of 320 Amperes. The device has a built-in 6000-count backlit display that turns off after 10 seconds of use. Additionally, it has a hold capability that lets users pause a reading on the screen.
The meter operates on 2x AAA batteries with a power consumption of 1.9mA, and provides a use time of approximately 500 hours.
Includes meter, pouch, carry strap and instructions
- Compact pocket size
- TRUE RMS conversion
- 6000 Count Display
- Maximum Input current rating 320A
- Auto power off
- Backlight
| Function | Range | Accuracy | Resolution |
|---|---|---|---|
| ACA | 60/300A | ±(2.0％+5) | 0.01A |
| Sampling rate | Approx. 2 times/sec. |
| Bandwidth | 45-400Hz |
| Display | 6000 |
| Clamp diameter/Conductor size | 22mm/10x25mm |
| Battery | LR03x2 |
| Battery life | Approx. 500 hrs. |
| Size/Mass | H145xW54xD31mm/Approx. 120g |
| Safety standards | IEC61010 CATIII300V |
Reviews
There are no reviews yet.