For usage in automobiles, Sanwa has created the DCM400AD, a digital clamp meter with multimeter capabilities.
Clamp meter that is appropriate for automotive maintenance and digital multimeter operations. It is built for the IEC measurement category CAT. III 300V. Both AC and DC voltages as well as both AC and DC currents can be measured by the apparatus. Additionally, it has the ability to conduct continuity tests and detect resistance up to 400.
The device features a 42-segment analog bar graph on a 4000-count display. The DCM400AD also has features like the hold function, which pauses a reading on the screen, the range hold, which allows you to manually change the measurement range, and the zero function, which allows you to subtract or add any offset values when you measure.
Includes meter, one set of test leads, carrying case and instruction manual.
- 4000 count / 42 segment analog bar graph
- Clamp opening size: 25mm
- DC/AC current 40A/400A
- Data hold
- Relative value
- Continuity check buzzer
- Auto power off(30min)
- Low batter power indication
Specifications
| Function | Range | Accuracy | Resolution |
|---|---|---|---|
| ACA | 40/400A | ±(2%±10) | 0.01A |
| DCA | 40/400A | ±(2.5%±10) | 0.01A |
| ACV | 400/600V | ±(1.5%±5) | 0.1V |
| DCV | 400/600V | ±(1%±2) | 0.1V |
| Resistance | 400Ω | ±(1%±2) | 0.1Ω |
| Continuity | Buzzer sounds at less than approx. 40Ω Open voltage: approx. 1.5V |
||
| Sampling rate | 2 times/sec., 20 times/sec. for bar graph |
| Bandwidth | 50～500Hz |
| Display | 4000 |
| Clamp diameter/Conductor size | Φ25mm/10×34mm |
| Battery | LR03×2 |
| Battery life | Approx. 50 hrs.（Alkaline battery) |
| Size/Mass | H193×W50×D28mm/Approx. 230g |
| Safety standards | IEC 61010 CAT.Ⅲ 300V CAT.Ⅱ 600V |
Reviews
There are no reviews yet.